電動扳手和死扳手，扳手是三種不同的扳手，它們都有各自的特點和使用方法。讓我們分別介紹一下。
Electric wrench and dead wrench, wrench is three different wrenches, they all have their own characteristics and methods of use. Let's introduce them respectively.
電動力矩扳手使用方法
Usage of electric torque wrench
將扳手方榫插入相應尺寸的套筒內
Insert the square tenon of the wrench into the socket of the corresponding size
將套筒插入螺母或螺栓頭
Insert the sleeve into the nut or bolt head
順時針方向均勻施加力
Apply force evenly clockwise
當您聽到“點擊”聲或感覺到扳手釋放力時，已達到設定的扭矩值。
When you hear the "click" sound or feel the wrench release force, the set torque value has been reached.
死扳手只能上、下一種規格的螺栓、螺母專用工具，常用規格有M24、M30、M36、M47、M54等。
The dead wrench can only be used as special tools for bolts and nuts of the next specification. The common specifications include M24, M30, M36, M47, m54, etc.
死扳手使用方法
Application method of dead wrench
選擇適合螺栓和螺母尺寸的死扳手。
Select a dead wrench suitable for the size of bolts and nuts.
檢查死扳手的老虎把是否有裂紋。只有在沒有裂縫的情況下才能使用。
Check whether the handle of the dead wrench has cracks. It can only be used without cracks.
使用時可以擊碎，但應防止死扳手飛或折斷傷人。
It can be broken during use, but the dead wrench shall not fly or break to hurt people.
轉動死扳手時應逐漸用力，防止用力過大造成滑動或斷裂。
Gradually apply force when turning the dead wrench to prevent sliding or fracture caused by excessive force.
當你握著一只僵硬的手時，避免被夾。
When you hold a stiff hand, avoid getting caught.
使用后請立即清洗并收好。
Please clean and put away immediately after use.
