Torsional shear wrench is mainly used for torsional shear type high-strength bolts. Its purpose is to break the working target wrench head bolt head and turn the switch to work. After a few seconds, the bolt head will be broken, and then take out a wrench to pop the ring head and pull the trigger, or complete the work.

電動扳手的影響主要是螺栓開始時,很容易使用和旨在螺栓拉主電源開關線電氣zui終扭轉剪切扳手扭剪型高強度螺栓,螺栓把電源開關的使用,直到扭剪型高強度螺栓梅花頭中斷。電動恒轉矩扳手可能zui終緊緊初,它的使用是先調整轉矩,然后螺栓扳手主要電氣角落也屬于一種恒轉矩扳手,它的使用是先調整旋轉程度,然后擰緊螺絲。電動角向扳手是一種特殊的電扳手，專門固定在鋼架角的螺栓。它和扭剪電動扳手一樣。

The main impact of electric wrench is that it is easy to use and designed to pull the main power switch wire with bolts at the beginning of the bolt. The electric zui final torsion shear wrench torsion shear type high-strength bolt, the use of the bolt to turn the power switch, until the torsion shear type high-strength bolt Torx is interrupted. The electric constant torque wrench may be used to adjust the torque first, and then the main electrical corner of the bolt wrench is also a constant torque wrench. Its use is to adjust the rotation degree first, and then tighten the screw. The electric angle wrench is a special type of electric wrench, which is specially used to fix the bolt at the steel frame angle. It is the same as the electric wrench for torsion shear.

扭剪型電動扳手的特點：

Features of torsion shear type electric wrench:

（1）使用壽命長

(1) Long service life

（2）手柄和機殼材料散熱性好

(2) Handle and shell materials have good heat dissipation

（3）功率大

(3) High power

（4）耐撞擊性強

(4) Strong impact resistance

（5）手使用

(5) Hand use

本文由扭剪電動扳手整理發布，您是不是對這些內容有所了解了呢?更多的內容請點擊：http://m.cnbeilibao.com我們會有更多精彩內容等你查看。

This article is organized and released by the torsion shear electric wrench. Do you know something about these contents? For more information, please click: http://m.cnbeilibao.com We will have more wonderful content waiting for you to check.