在線留言|
您好，歡迎來到 濟南萬中電動扳手有限公司網站！
服務熱線： 400-117-8816
13406879330
13406879330
扭剪扳手,扭剪螺栓專用扳手,扭剪電動扳手,扭剪槍生產廠家
扭剪扳手,扭剪螺栓專用扳手,扭剪電動扳手,扭剪槍生產廠家
扳手方面的原因有，扳手的扭力達不到，或者套筒打滑，如果扳手?jǐn)Q型號鳳買，套筒也沒有打滑，那就是螺栓方面的原因，螺栓的硬度不夠，也會出現螺栓打滑擰不下來的情況，另外螺栓選擇的長度是否超出扳手能達到的極限，長度太長，也擰不下來，螺栓要選正規廠家購買，型號及長度都要按工程需要購買
The reasons for the wrench are that the torque of the wrench cannot be reached, or the sleeve slips. If the wrench model is purchased by Feng and the sleeve does not slip, it is due to the bolt. The hardness of the bolt is not enough, and the bolt may also slip and cannot be unscrewed. In addition, whether the length of the bolt selected exceeds the maximum limit that the wrench can reach. If the length is too long, it cannot be unscrewed. The bolt should be purchased from a reputable manufacturer, and the model and length should be purchased according to the needs of the project
本文由扭剪螺栓專用扳手友情奉獻.更多有關的知識請點擊:http://m.cnbeilibao.com 真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article is dedicated by a dedicated wrench for torsion shear bolts. For more information, please click on: http://m.cnbeilibao.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned
