電動扭剪扳手顧名思義就是扭剪梅花頭螺栓擰緊作業的必備工具，幫助您裝、拆螺拴、螺母，同時能比較準確地控制擰緊扭矩。利用螺栓定扭矩，當扳手達到一定扭矩時即可剪斷螺栓的梅花頭部分，其扭矩精度和軸向拉力是靠螺栓的定扭矩V型切口來保證的。拆裝扭力矩大、比手工更保險可靠。方便、美觀、實用、便于隨車攜帶。廣泛用于鋼結構橋梁、廠房、發電設備等設施的施工作業。
As the name suggests, the electric torsion shear wrench is a necessary tool for the tightening operation of torsion shear Torx head bolts. It helps you install and remove bolts and nuts, and can accurately control the tightening torque at the same time. Using the bolt fixed torque, when the wrench reaches a certain torque, the plum blossom head of the bolt can be cut off. Its torque accuracy and axial tension are guaranteed by the constant torque V-notch of the bolt. The disassembly torque is large, which is safer and more reliable than manual. Convenient, beautiful, practical and easy to carry with the vehicle. It is widely used in the construction of steel structure bridges, plants, power generation equipment and other facilities.
電動扳手的特點：（1）使用壽命長（2）手柄和機殼材料散熱性好（3）功率大（4）耐撞擊性強（5）手使用性價比
Characteristics of electric wrench: (1) long service life (2) good heat dissipation of handle and casing materials (3) high power (4) strong impact resistance (5) the highest cost performance of hand
電動扭剪扳手是一種終緊扭剪型高強度螺栓的工具，一般有電動扭剪扳手和手動扭剪扳手，其中電動扭剪扳手比較常見。
Electric torsional shear wrench is a tool for final tightening torsional shear type high-strength bolts. Generally, there are electric torsional shear wrench and manual torsional shear wrench, among which electric torsional shear wrench is more common.
扭剪扳手的應用： 扭剪型高強螺栓的初緊可使用沖擊電動扳手或定扭矩扳手,而終緊必須使用扭剪扳手，所以扭剪扳手是專門終緊扭剪型高強螺栓的。
Application of torsional shear wrench: impact electric wrench or constant torque wrench can be used for initial tightening of torsional shear high-strength bolts, while torsional shear wrench must be used for final tightening, so torsional shear wrench is specially used for final tightening of torsional shear high-strength bolts.
扭剪扳手的使用： 扭剪扳手主要是終緊扭剪型高強螺栓的，它的目的就是把扭剪型高強螺栓的梅花頭打斷即可。工作時將扳手頭對準螺栓頭，扣動開關即可開始工作，幾秒后，螺栓梅花頭將被扭斷，然后抽出扳手扣動扳機將梅花頭彈出，即結束工作。
Use of torsion shear wrench: the torsion shear wrench is mainly used to finally tighten the torsion shear high-strength bolt. Its purpose is to break the plum blossom head of the torsion shear high-strength bolt. When working, align the wrench head with the bolt head, pull the switch to start working. After a few seconds, the bolt plum blossom head will be broken, then pull out the wrench and pull the trigger to pop up the plum blossom head, that is, end the work.
扭剪扳手的特點： 操作方便、省時省力、方便。
The characteristics of torsion shear wrench: easy to operate, time-saving, labor-saving, safe and convenient.
優勢
advantage
一、操作方便。
1、 Easy to operate.
二、省時省力。
2、 Save time and effort.
三、高。
3、 The price is high.
The above wonderful content comes from: torsion and shear wrench of Jinan Wanzhong electric wrench Co., Ltd. and sharing. Please continue to pay attention to us for more content: http://m.cnbeilibao.com
